Missile defense parts, documented end to end.

Structures, fittings, housings and test hardware for missile defense, interceptor and launch programs. We source 5-axis machining, turning, sheet metal, additive and finishing through a vetted network of AS9100D compliant, ITAR registered vendors that run titanium, Inconel and aerospace aluminum. One project manager owns your job from RFQ to delivery, with certs and inspection records attached.

How we review it

Your project manager and a technical lead review every print within 24 hours. On controlled programs we confirm ITAR markings and flow-down requirements, check that tolerances are achievable in the material, and route the part only to ITAR registered domestic vendors with capacity open now.

Quality + Compliance

AS9100D Compliant · ISO 9001:2015 · ITAR Registered · NIST 800-171 Compliant · ITAR controlled workflow

What we source

Routed only to ITAR registered domestic vendors.

Structural fittings
Titanium and aluminum.
Avionics housings
Machined billet.
Seeker + optical mounts
Tight-tolerance bores.
Turned components
Shafts, spacers + sleeves.
Additive components
DMLS Inconel + titanium.
Formed sheet parts
Shields, clips + brackets.
Cable assemblies
Built to print.
Test hardware
Fixtures, adapters + GSE.

Specifications

What a typical controlled job looks like.

Tolerances
±0.005" standard. ±0.001" on critical features.
Metals
Ti-6Al-4V, Inconel 625 + 718, 6061 + 7075 aluminum, 17-4 PH.
Processes
5-axis milling, turning, DMLS, sheet metal, wire EDM.
Post-processing
Anodize, passivation, plating, paint, to print.
Documentation
Material + process certs. FAI on request.
Quote review
Within 24 hours.

Before it’s built

Controlled parts get expensive when the paperwork lags the hardware. We confirm your flow-downs before a vendor is selected, check which features should be finished after heat treat, flag thin walls and deep pockets that will fight you in titanium, and confirm whether your finish spec requires an approved processor.

Space + missile defense questions

Yes. Precision Expedited is ITAR registered, and controlled work goes only to vetted, ITAR-registered domestic vendors. Technical data is handled under NIST 800-171 compliant controls from RFQ to delivery.

We confirm your flow-down requirements before a vendor is selected, so the shop that makes the part is qualified to meet them. List the clauses with your RFQ.

Yes. Thin walls and deep pockets in titanium go to shops with that experience, and we flag features likely to distort during drawing review.

DMLS Inconel and titanium are available for development and test hardware through vetted partners. We confirm suitability for your application during review.

Material and process certifications and inspection records ship with every order. First article inspection is available on request.

A STEP file and 2D print, material and finish, quantities and timing, and ITAR markings, flow-down clauses and finish requirements. Missing something? Send what you have and we’ll ask for the rest.

What makes us different

DFM review before anything runs.

Every drawing reviewed before sourcing. Rework in Inconel costs ten times what it costs in aluminum.

One contact. Full accountability.

One PM from first drawing review through final delivery. No handoffs. No surprises.

Parts inspected before shipment.

Full traceability on every part. Chain of custody from raw stock through outgoing inspection.

The right shop, not the cheapest quote.

Every supplier qualified against AS9100 requirements. Machinists selected for experience in hard material.