Rugged parts from prototype to fleet.

Chassis weldments, brackets, enclosures and harnesses for tactical vehicle upgrades, unmanned ground vehicles and defense robotics. We source CNC machining, sheet metal fabrication and welding, injection molding and harness assembly through a vetted domestic network. Start with one prototype and move to bridge and production lots through the same project manager, with certs and country of origin on every order.

How we review it

Your project manager and a technical lead review every print within 24 hours. For vehicle and robotics hardware we check weldment tolerances and distortion risk, confirm coating and corrosion callouts, and route each part to a shop with the right process and the capacity to grow with your volume.

Quality + Compliance

AS9100D Compliant · ISO 9001:2015 · ITAR Registered · NIST 800-171 Compliant · Country of origin documented

What we source

One contact across machining, fabrication, and assembly.

Chassis + frame weldments
Steel and aluminum.
Brackets + mounts
Machined or formed.
Control enclosures
Sheet metal and billet.
Battery housings
Formed and welded.
Actuator components
Shafts, couplers + spacers.
Sensor + camera mounts
Machined aluminum.
Molded covers
Production plastic parts.
Wire harnesses
Built to print.

Specifications

What a typical vehicle job looks like.

Tolerances
±0.005" standard. ±0.001" on critical features.
Materials
Steel, stainless, 6061 + 5052 aluminum, nylon, ABS.
Processes
CNC, sheet metal, welding, injection molding, harnesses.
Finishes
Powder coat, paint, anodize, plating, to print.
Documentation
Material certs, inspection records, country of origin.
Quote review
Within 24 hours.

Before it’s built

Vehicle and robot builds mix processes, and that is where schedules slip. We check weldments that need machining after welding, flag sheet metal bends that won’t hold flat after coating, look for parts that should move to molding as volume grows, and line up finishing so it doesn’t become the long pole.

Ground vehicle + UGV questions

Yes. Many programs start with one prototype, then move to bridge and production lots. The same project manager carries the program, and we flag parts that should move to molding or a different process as volume grows.

Yes. Certs and country of origin ship with every order. If your contract has specific domestic sourcing clauses, send them with the RFQ and we’ll confirm every vendor in the chain meets them.

We check weldment tolerances and distortion risk during drawing review, and plan machining after welding where critical surfaces need it.

We confirm coating and corrosion callouts at quote, including powder coat, paint, anodize and plating, and flag bends or features that won’t hold flat after coating.

Precision Expedited is ITAR registered and NIST 800-171 compliant. Drawings and models are handled under documented access controls from RFQ to delivery, and ITAR work goes only to vetted, ITAR-registered domestic shops.

A STEP file and 2D print, material and finish, quantities and timing, and coating, corrosion and sourcing requirements. Missing something? Send what you have and we’ll ask for the rest.

What makes us different

DFM review before anything runs.

Every drawing reviewed before sourcing. Rework in Inconel costs ten times what it costs in aluminum.

One contact. Full accountability.

One PM from first drawing review through final delivery. No handoffs. No surprises.

Parts inspected before shipment.

Full traceability on every part. Chain of custody from raw stock through outgoing inspection.

The right shop, not the cheapest quote.

Every supplier qualified against AS9100 requirements. Machinists selected for experience in hard material.