Aviation parts sourced to the flowdowns.

Cabin interior components, structural brackets, sheet metal assemblies and avionics enclosures for commercial and business aviation programs. We source CNC machining, sheet metal, injection molding and finishing through a vetted network of AS9100D compliant vendors, and one contact owns the job from a single interior mod to recurring spares.

How we review it

Your project manager and a technical lead read the PO flowdowns alongside the drawing within 24 hours. Approved processors, finish specs and documentation requirements get confirmed before the quote, so the shop we choose can ship exactly what your receiving inspection will accept.

Quality + Compliance

AS9100D Compliant · ISO 9001:2015 · ITAR Registered · NIST 800-171 Compliant · Inspection before shipment

What we source

Matched to the shop that runs the part every day.

Cabin interior parts
Seat, galley + lining hardware.
Brackets + fittings
Machined aluminum + titanium.
Sheet metal assemblies
Formed, welded, riveted.
Avionics enclosures
Housings + chassis.
Molded interior parts
High-performance resins.
Spares + repeat lots
Same rev, same inspection.
Fixtures + tooling
Machined and additive.
Finished parts
Anodize, chem film, paint.

Specifications

What a typical aviation job looks like.

Tolerances
±0.005" standard. ±0.001" on critical features.
Metals
Aluminum 6061, 7075, 2024, titanium, stainless.
Plastics
PEEK, Ultem + high-performance resins.
Documentation
Material certs, inspection records, FAI on request.
Volumes
Prototype through low-rate production.
Quote review
Within 24 hours.

Before it’s built

Most aviation rejects trace back to paperwork and finish callouts. We check for missing material specs, finishes that conflict with the base alloy, flatness that thin sheet parts can’t hold, and approved-processor requirements buried in the PO. You hear about it before the quote goes out.

Commercial + business aviation questions

Yes. Your project manager and a technical lead read the PO flowdowns with the drawing. Approved-processor, finish and documentation requirements are confirmed before we quote, so the shop we place the job with can meet them.

Seat, galley and lining hardware, molded interior parts in high-performance resins, machined brackets and fittings, and sheet metal assemblies. Send the print and your interior spec, and we’ll match the part to a shop that runs that work every day.

Yes. Repeat lots ship at the same revision with the same inspection, managed by the same contact. Every shop in our network is pre-qualified, so if a spare needs to move for capacity, you don’t requalify a vendor.

Material certs and inspection records ship with every order. When your program requires it, we can provide full quality documentation on each order, including FAI. List your documentation requirements with the RFQ.

±0.005″ is standard, and shops in our network hold ±0.001″ on critical features. For tighter GD&T, send your print and we’ll review feasibility before quoting.

A STEP file and 2D print, material and finish specs, quantities and timing, and your PO flowdowns. Missing something? Send what you have and we’ll ask for the rest.

What makes us different

Flowdowns read before anything runs.

Every drawing and PO reviewed before sourcing. A missed processor callout costs more at receiving inspection than at quote.

One contact. Full accountability.

One PM from first drawing review through final delivery. No handoffs. No surprises.

Parts inspected before shipment.

Full traceability on every part. Chain of custody from raw stock through outgoing inspection.

The right shop, not the cheapest quote.

Every supplier qualified against AS9100 requirements. Interior and structural work placed with shops that run it every day.