- Industry
- Aerospace
- Capability
- Large Weldments
- Welding
- AWS D17.1 fusion welding
- Inspection
- Full CMM report
Structural weldments for an aerospace OEM’s robotic system build, welded, machined and inspected stateside under one contact. The previous supplier was weeks late. With us, the first parts shipped three weeks after the PO.
3 wks
PO to first shipment
±0.0005″
Held after welding
1
PM, RFQ to freight
The Challenge
Weeks late, and no word on when. An aerospace OEM was building a large robotic system for its own customer. Every weldment plugs into that assembly, so one late or out-of-spec frame stalls the whole build.
The previous supplier ran weeks late and went quiet. At this size and weight the parts had to be built stateside, and few US shops can weld and machine them under one roof. Capacity is tight across the industry: IATA puts the global aircraft order backlog at a record 17,000, and the American Welding Society projects the US will need 320,500 welders by 2029. Every program is pulling on the same shops.
How We Delivered

- DFM before the quote. Drawings were reviewed the day they arrived, and risks were flagged in the quote, before the PO.
- One shop, weld to inspection. A vetted US shop in our network welds, machines and inspects under one roof, so one team owns the stack-up. Every part ships with a full CMM report.
- Fixed the unbuildable callout. The prints called out tolerances the part couldn’t hold. We built an alternate with the shop and got it approved.
- Weekly updates, freight handled. Progress reports every week from PO to shipment, and oversize freight arranged for the customer.
One project manager, from the first drawing to the last oversize truck.
The Result
The first weldments shipped three weeks after the PO, on a build that had been slipping. One PE project manager owned the job from drawings to delivery, with no handoffs and no chasing updates.
After the first order, the customer sent more programs our way. Our engineering and DFM support and fabrication network cover the same work for aerospace teams, and we’re AS9100D Compliant and ITAR Registered.
Frequently asked questions
Yes. The shop behind this program performs AWS D17.1 aerospace fusion welding and machines after welding, holding ±0.0005″.
The shop behind this program machines up to 10′ x 9′ x 6′, five sides in one setup, with 10-ton crane capacity and volume up to 3,000 large assemblies a year. Send us the drawings and we’ll match other work to the right shop in our network.
Requirements vary by project, and we can provide full documentation when necessary on each order. On this program, every part shipped with a full CMM report. See our certifications and compliance page for details.
Send us the drawings.
A real person will contact you within 24 hours.