Aviation parts sourced to the flowdowns.
Cabin interior components, structural brackets, sheet metal assemblies and avionics enclosures for commercial and business aviation programs. We source CNC machining, sheet metal, injection molding and finishing through a vetted network of AS9100D compliant vendors, and one contact owns the job from a single interior mod to recurring spares.
How we review it
Your project manager and a technical lead read the PO flowdowns alongside the drawing within 24 hours. Approved processors, finish specs and documentation requirements get confirmed before the quote, so the shop we choose can ship exactly what your receiving inspection will accept.
Quality + Compliance
AS9100D Compliant · ISO 9001:2015 · ITAR Registered · NIST 800-171 Compliant · Inspection before shipment
What we source
Matched to the shop that runs the part every day.
- Cabin interior parts
- Seat, galley + lining hardware.
- Brackets + fittings
- Machined aluminum + titanium.
- Sheet metal assemblies
- Formed, welded, riveted.
- Avionics enclosures
- Housings + chassis.
- Molded interior parts
- High-performance resins.
- Spares + repeat lots
- Same rev, same inspection.
- Fixtures + tooling
- Machined and additive.
- Finished parts
- Anodize, chem film, paint.
Specifications
What a typical aviation job looks like.
- Tolerances
- ±0.005" standard. ±0.001" on critical features.
- Metals
- Aluminum 6061, 7075, 2024, titanium, stainless.
- Plastics
- PEEK, Ultem + high-performance resins.
- Documentation
- Material certs, inspection records, FAI on request.
- Volumes
- Prototype through low-rate production.
- Quote review
- Within 24 hours.
Before it’s built
Most aviation rejects trace back to paperwork and finish callouts. We check for missing material specs, finishes that conflict with the base alloy, flatness that thin sheet parts can’t hold, and approved-processor requirements buried in the PO. You hear about it before the quote goes out.
Commercial + business aviation questions
Yes. Your project manager and a technical lead read the PO flowdowns with the drawing. Approved-processor, finish and documentation requirements are confirmed before we quote, so the shop we place the job with can meet them.
Seat, galley and lining hardware, molded interior parts in high-performance resins, machined brackets and fittings, and sheet metal assemblies. Send the print and your interior spec, and we’ll match the part to a shop that runs that work every day.
Yes. Repeat lots ship at the same revision with the same inspection, managed by the same contact. Every shop in our network is pre-qualified, so if a spare needs to move for capacity, you don’t requalify a vendor.
Material certs and inspection records ship with every order. When your program requires it, we can provide full quality documentation on each order, including FAI. List your documentation requirements with the RFQ.
±0.005″ is standard, and shops in our network hold ±0.001″ on critical features. For tighter GD&T, send your print and we’ll review feasibility before quoting.
A STEP file and 2D print, material and finish specs, quantities and timing, and your PO flowdowns. Missing something? Send what you have and we’ll ask for the rest.