Enclosures that arrive ready to integrate.
Machined housings, formed chassis, panels and covers for radios, mission computers, power systems and sensor electronics. We source machining, sheet metal, finishing and wire harness assembly through a vetted network of AS9100D compliant vendors, so housings and cables come from one contact instead of three. Controlled drawings stay with our US team, and every part is inspected to drawing.
How we review it
Your project manager and a technical lead review every print within 24 hours. For enclosures we check sealing surface and gasket callouts, confirm thread and insert specs, review finish and masking requirements, and route the job to a shop with thin-wall housing experience and capacity open now.
Quality + Compliance
AS9100D Compliant · ISO 9001:2015 · ITAR Registered · NIST 800-171 Compliant · Finish to print
What we source
Housings, chassis, and cables under one contact.
- Machined housings
- Billet aluminum.
- Sheet metal chassis
- Formed and welded.
- Front panels
- Finished to print.
- Covers + lids
- Sealing surfaces held.
- Heat sinks
- Machined aluminum.
- Rack hardware
- Rails, brackets + trays.
- Cable assemblies
- Built to print.
- Wire harnesses
- Matched to the housing.
Specifications
What a typical enclosure job looks like.
- Tolerances
- ±0.005" standard. ±0.001" on critical features.
- Materials
- 6061 + 5052 aluminum, stainless, steel, PEEK.
- Processes
- CNC milling, sheet metal, harness assembly.
- Finishes
- Anodize, chem film, paint, powder coat, masking to print.
- Documentation
- Material certs, inspection records. FAI on request.
- Quote review
- Within 24 hours.
Before it’s built
Enclosures fail at integration, not at the machine. We check sealing surfaces against your gasket spec, flag masking that chem film and paint will need, confirm insert and thread callouts match your hardware, and make sure the harness and the housing are built to the same revision.
Defense enclosure questions
Yes. Machined housings, formed chassis, cable assemblies and wire harnesses come through one program and one contact, built to the same revision so they fit together at integration.
We review finish and masking requirements during drawing review and flag any surface that needs masking the print doesn’t call out. Anodize, chem film, paint and powder coat are all finished to print.
Yes. Sealing surfaces and covers are checked against your gasket spec before the job goes out, and routed to shops with thin-wall housing experience.
Precision Expedited is ITAR registered and NIST 800-171 compliant. Controlled drawings stay with our US team, and ITAR work goes only to vetted, ITAR-registered domestic shops.
Yes. We support one-off development housings through production runs with the same drawing review and inspection, and one project manager carries the program throughout.
A STEP file and 2D print, material and finish, quantities and timing, and gasket, insert and finish specs, plus any harness drawings. Missing something? Send what you have and we’ll ask for the rest.