Machine builder parts, the same every run.
Machined components, frames, guards, enclosures, brackets and harnesses for automation equipment and production machinery. We source CNC machining, sheet metal, injection molding and finishing through a vetted network that holds ±0.001″ on critical features. One contact runs the full BOM as one program, so your build gets one ship date instead of six.
How we review it
Your project manager and a technical lead review every print within 24 hours. For machine builds we check fits between machined and fabricated parts, weldment tolerances and finish callouts across the BOM, then place each part with a shop that can run it again next quarter.
Quality + Compliance
AS9100D Compliant · ISO 9001:2015 · ITAR Registered · NIST 800-171 Compliant · FAI Available · PPAP Level 1–3 Available
What we source
Matched to shops that run your BOM again next quarter.
- Machined components
- Plates, blocks, shafts.
- Frames + weldments
- Steel and aluminum.
- Guards + enclosures
- Formed, powder coated.
- Brackets + mounts
- Sheet metal, machined.
- Motion components
- Rails, carriages, bearing seats.
- Molded covers
- Housings and knobs.
- Wire harnesses
- Built to print.
- Fixtures + tooling
- Machined and additive.
Specifications
What a typical machine build looks like.
- Tolerances
- ±0.005" standard. ±0.001" on critical features.
- Materials
- Aluminum, 1018 + 4140 steel, stainless, plastics.
- Processes
- CNC, sheet metal, welding, molding, assembly.
- Finishes
- Anodize, powder coat, black oxide, plating.
- Documentation
- Material certs, FAI + PPAP on request.
- Quote review
- Within 24 hours.
Before it’s built
Machine BOMs mix tight machined fits with fabricated parts that move when they’re welded. We flag weldments that need post machining, tolerances tighter than the assembly needs, and parts quoted as one-offs that you’ll reorder every quarter. You hear about it before the quote goes out.
Industrial automation + machinery questions
Yes. Machined parts, weldments, guards, molded covers and harnesses run as one program with one contact, so your build gets one ship date instead of six.
We flag weldments that need post machining during drawing review, then sequence welding and machining with a shop that runs both, so critical features are cut after the part has moved.
Yes. Repeat orders run at the approved revision with the same inspection, and each part is placed with a shop that can run it again next quarter.
Yes. FAI and PPAP are available on request. List your documentation requirements with the RFQ and we’ll confirm the package before quoting.
±0.005″ is standard, and shops in our network hold ±0.001″ on critical features. We also flag tolerances tighter than the assembly needs, since they add cost without improving fit.
STEP files and 2D prints for the BOM, materials and finishes, quantities and reorder cadence, and your build date. Missing something? Send what you have and we’ll ask for the rest.