Small, tight-tolerance parts, Swiss turned to print.
Pins, screws, shafts, cannulated parts, connectors and small machined components for medical devices. We source Swiss turning, CNC milling, wire EDM and finishing through a vetted vendor network that includes manufacturing partners operating under ISO 13485, holding ±0.001″ on critical features. One project manager keeps the inspection plan the same from prototype lot to production.
How we review it
Your project manager and a technical lead review every print within 24 hours. For small parts we check GD&T feasibility at the feature size, thread and bore callouts, and inspection methods, then route the job to a shop with Swiss capacity and the gauging to prove the part.
Quality + Compliance
ISO 13485 Compliant · AS9100D Compliant · ISO 9001:2015 · Material certs every order · FAI on request
What we source
Matched to shops with Swiss capacity open now.
- Pins + shafts
- Swiss turned.
- Medical screws
- Threaded to print.
- Cannulated parts
- Through-bores, tight concentricity.
- Connector components
- Turned and milled.
- Bushings + spacers
- Stainless and PEEK.
- Cross-holes + slots
- Secondary milling.
- Valve + fluidic parts
- Small machined bodies.
- Prototype lots
- Same plan as production.
Specifications
What a typical small-part job looks like.
- Tolerances
- ±0.001" on critical features.
- Materials
- 316L, 17-4 PH, Ti-6Al-4V, PEEK, Delrin.
- Processes
- Swiss turning, CNC milling, wire EDM.
- Finishes
- Passivation, electropolish, laser marking.
- Documentation
- Material certs, FAI, inspection records.
- Quote review
- Within 24 hours.
Before it’s built
Most of the risk in a small part sits in features you can’t see without magnification. We check concentricity and runout against the bar size, threads that need gauging spelled out, and burr requirements on cross-holes, then confirm how each critical feature gets measured.
Micro-precision questions
±0.001″ on critical features is routine. We check GD&T feasibility at the actual feature size during drawing review and confirm how each critical feature will be measured.
Yes. Cannulated parts with through-bores and tight concentricity are Swiss turned through shops with the capacity and gauging to prove them.
Burr requirements on cross-holes and slots are flagged during review, and we confirm deburr and inspection methods before the quote goes out.
Yes. The inspection plan set for your prototype lot carries into production, so the parts are measured the same way every lot.
Precision Expedited is ISO 13485 compliant, and our vendor network includes manufacturing partners operating under ISO 13485. Programs that require a certified source go to one. Note the requirement with your RFQ.
A STEP file and 2D print, material and finish, quantities and timing, and thread, concentricity and inspection requirements. Missing something? Send what you have and we’ll ask for the rest.
