Surgical instrument parts, traceable to the shop.
Instrument jaws, shafts, handles, ratchets and handheld device housings for surgical and procedural device programs. We source CNC machining, Swiss turning, injection molding and finishing through a vetted vendor network that includes manufacturing partners operating under ISO 13485. Material certs and inspection records travel with every order, and one project manager stays on your program through design transfer.
How we review it
Your project manager and a technical lead review every print within 24 hours. For instrument parts we check passivation and electropolish callouts, edge and burr requirements and cosmetic finish standards, then route the job to a shop that runs 17-4 PH and 316L every week.
Quality + Compliance
ISO 13485 Compliant · AS9100D Compliant · ISO 9001:2015 · Material certs every order · FAI on request
What we source
Matched to shops qualified for regulated work.
- Instrument jaws + tips
- 17-4 PH and 316L.
- Shafts + tubes
- Swiss turned.
- Handles + grips
- Machined or molded.
- Ratchets + linkages
- Small precision parts.
- Handheld housings
- Medical-grade resins.
- Trigger + button parts
- Molded and machined.
- Marked parts
- Laser marked to spec.
- Prototype instruments
- Fit-check builds.
Specifications
What a typical instrument job looks like.
- Tolerances
- ±0.001" on critical features.
- Metals
- 316L, 17-4 PH, Ti-6Al-4V, aluminum.
- Plastics
- PEEK, Delrin, UHMWPE, medical-grade resins.
- Finishes
- Passivation, electropolish, bead blast, laser marking.
- Documentation
- Material certs, FAI, inspection records.
- Quote review
- Within 24 hours.
Before it’s built
Instrument rejects usually trace back to finish and edge callouts. We flag burr and edge-break requirements left off the print, passivation specs that conflict with the alloy, and biocompatibility requirements that limit which resins and vendors qualify.
Surgical instrument questions
Precision Expedited is ISO 13485 compliant, and our vendor network includes manufacturing partners operating under ISO 13485. Programs that require a certified source go to one. Note the requirement with your RFQ.
Material certifications and inspection records travel with every order, and first article inspection is available. If your quality system needs a complete paper trail, list it with your RFQ and we’ll confirm the documentation package before quoting.
Yes. Passivation, electropolish, bead blast and laser marking are available to your spec. We flag passivation callouts that conflict with the alloy during drawing review.
Yes. Shafts, tubes and small precision parts are Swiss turned through shops in our network that run 17-4 PH and 316L every week.
Yes. One project manager stays on your program from prototype instruments through design transfer and production, so supplier history and context stay with the job.
A STEP file and 2D print, material and finish, quantities and timing, and finish, edge-break and biocompatibility requirements. Missing something? Send what you have and we’ll ask for the rest.
